BEE PASS: Merrill and Cookie the Taurs : DEER/MOOSE
These final taurs come with hooves and both faces.
Please let us know if you would prefer a pawtaur in the notes and we will swap the deer parts for pawtaur!
Come with GRAND ANTLER as default.
Merrill and Cookie, the adoptable little taurs. The FINAL blooms from our bloom year lineup (tomorrow there is one more special blindbox launch to end our incredible year but these guys are our last official babies. Adoption with Bee Pass.
A tiny 3D printed Ball jointed Doll kit from December 2021. These kits are put together by just 2 people and waiting times can sometimes get extensive. We are currently experiencing a large volume of orders so please be patient. If patience isn’t your thing (we understand!) our kits may not be for you.
Merrill is a more serious sweetheart while cookie is a smiley bundle of energy.
This listing is for the Deer/Moose variety. These include the deer ears and your choice of delicate antler, grand antler and moose. They come with hooves. Please see the alternate listing for pawtaur variants.
As these are a kit for you to finish at home, there will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your bloom safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately as well as wig kits for you to make wigs for your bloom. Tutorial to come soon.
WAIT TIMES ARE EXTENSIVE AT THE MOMENT. We will be finishing this bloom year and then pausing on monthly releases until we are caught up. After which, we will move to a premade kit basis where blooms will be available to ship right away. Until then please prepare for a long wait.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
These final taurs come with hooves and both faces.
Please let us know if you would prefer a pawtaur in the notes and we will swap the deer parts for pawtaur!
Come with GRAND ANTLER as default.
Merrill and Cookie, the adoptable little taurs. The FINAL blooms from our bloom year lineup (tomorrow there is one more special blindbox launch to end our incredible year but these guys are our last official babies. Adoption with Bee Pass.
A tiny 3D printed Ball jointed Doll kit from December 2021. These kits are put together by just 2 people and waiting times can sometimes get extensive. We are currently experiencing a large volume of orders so please be patient. If patience isn’t your thing (we understand!) our kits may not be for you.
Merrill is a more serious sweetheart while cookie is a smiley bundle of energy.
This listing is for the Deer/Moose variety. These include the deer ears and your choice of delicate antler, grand antler and moose. They come with hooves. Please see the alternate listing for pawtaur variants.
As these are a kit for you to finish at home, there will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your bloom safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately as well as wig kits for you to make wigs for your bloom. Tutorial to come soon.
WAIT TIMES ARE EXTENSIVE AT THE MOMENT. We will be finishing this bloom year and then pausing on monthly releases until we are caught up. After which, we will move to a premade kit basis where blooms will be available to ship right away. Until then please prepare for a long wait.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
These final taurs come with hooves and both faces.
Please let us know if you would prefer a pawtaur in the notes and we will swap the deer parts for pawtaur!
Come with GRAND ANTLER as default.
Merrill and Cookie, the adoptable little taurs. The FINAL blooms from our bloom year lineup (tomorrow there is one more special blindbox launch to end our incredible year but these guys are our last official babies. Adoption with Bee Pass.
A tiny 3D printed Ball jointed Doll kit from December 2021. These kits are put together by just 2 people and waiting times can sometimes get extensive. We are currently experiencing a large volume of orders so please be patient. If patience isn’t your thing (we understand!) our kits may not be for you.
Merrill is a more serious sweetheart while cookie is a smiley bundle of energy.
This listing is for the Deer/Moose variety. These include the deer ears and your choice of delicate antler, grand antler and moose. They come with hooves. Please see the alternate listing for pawtaur variants.
As these are a kit for you to finish at home, there will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your bloom safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately as well as wig kits for you to make wigs for your bloom. Tutorial to come soon.
WAIT TIMES ARE EXTENSIVE AT THE MOMENT. We will be finishing this bloom year and then pausing on monthly releases until we are caught up. After which, we will move to a premade kit basis where blooms will be available to ship right away. Until then please prepare for a long wait.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
PLEASE WEAR A MASK.
Invest in a good one. Your health is so important.
Supply List;
Scissors
1.5mm crochet hook is incredibly useful but not necessary.
Lower grit sandpaper (600+ if sanding by hand) or a dremel with abrasive ‘fuzzy’ attachment.
High Grit sandpaper (1500+) for finishing
UV Cut spray.
Includes;
Merril or Cookie Head
Pink, Loamy or Blue taur body
2 Pairs of hands
1 tufted tail
1 pair of deer or cat like ears, horns if applicable.
This bloom will be sent with all elastic and magnets required to put them together. We use a tension bar system in the neck so no S-hook is included.
Do not forget to spray the entire doll with UV cut spray after sealing! This will protect her resin!
M E R R I L L F A R M
Another sentimental baby to round out this year. The last holiday my family had as a complete unit was at Christmas, in a log cabin on a Moose farm in North Conway. It was by far the most magical Christmas i’ve ever had and I will always remember it so fondly. Every afternoon, white cookies and spiced apple cider were served and thus Merril and Cookie are a little tribute to that very special childhood holiday before my world was turned upside down.
The video below will be updated to the taurs’ specific video once it has finished being created. Please wait patiently!